Drilling structural parts processing plant with high price

Drilling Structural Parts processing plant with high price

Product introduction：

Key points of Water Well Drilling Inner Tower production

1. Select the appropriate bit: the bit for the inner tower of the water well drill shall be the bit suitable for the rock type, commonly used are triangular cone bit, flat bit, cone bit, etc.

2. Control the drilling speed: the drilling speed should be moderate, too fast will easily cause bit wear, and too slow will affect the production efficiency.

3. Strengthen cooling and lubrication: During drilling, cooling and lubrication shall be strengthened to avoid overheating of the drill bit and aggravating wear.

4. Control the drilling diameter: the drilling diameter should be controlled within the appropriate range to avoid the low production efficiency caused by too large or too small hole diameter.

5. Drilling quality inspection: after drilling, quality inspection shall be carried out to ensure that the hole diameter, hole depth, etc. meet the requirements and avoid affecting subsequent work.

6. Regular maintenance of equipment: the water well drill tower is an important production equipment, which should be maintained regularly to ensure the normal operation of the equipment and extend the service life of the equipment.

Product parameters：

Name: XSC1300 Water Well Drilling tower

Size: 11126mm*964mm*470mm

Weight: 1538 kg

Product picture：